| |
Current lead time to ship orders is 6-8 weeks or more.
A trolling bar allows the positioning of
downrigger's, rod holders and other accessories to be strategically
located across the transom. Also adds freeboard depth to
shallow boats for added safety.
With this bar's Super Duty design and grooved bottom
interior you won't have a worry in the world about how secure your
equipment is in this system. With these added features Traxstech
continually strives to bring their fellow fisherman the best
equipment available at an affordable price without sacrificing
quality. |
Trolling bar is 8' long. Other lengths sold below in the
Build Your Own section.
It is recommended that the bar be approx. 2" less than the beam
of the boat to allow some room between the end of the bar & the side
of the boat, especially dockside when the boat tips during boarding.
Features:
 | Anodized aluminum mounting track with a grooved bottom design |
| Generally used for mounting across the transom |
| Contact us for more creative ideas |
| Available with straight risers (mounted on the transom) or reverse risers (mounted
on the gunwales) |
Standard Trolling Bar Package Includes:
| Can be ordered with two 6", 24", 36", 48",
or 60" mounting tracks.
 | 6" tracks are sufficient for use with straight risers |
| When using reverse risers, tracks are mounted on
the gunwales starting at the transom. The
trolling bar is mounted at the rear of the track & rod holders and/or other
accessories can be mounted on these tracks. |
|
| Two 4 1/2" risers, either straight or reverse. (Reverse
are used when tracks are mounted on the gunwales. The risers are put into the transom end of mounting tracks & the bar goes across the transom.) |
| Two 4' sections with connecting plate |
| Two bar end caps |
If you want a trolling bar length other than the 8' standard package,
you can build your own package here with
the length of trolling bar you want.
6" risers available. Substitutions sold below.
Additional risers sold here.
Downrigger bases (set &
swivel) sold
separately.
If your boat has a thin hull, a backing plate is recommended
to distribute the weight to protect the boat from damage. Check
the underside of your transom or gunwale to see if it is thin or already
reinforced. If it is not reinforced, a backing plate should be
used.
Also available in black for an additional 10%.
Order after ordering trolling bar package
Drop shipped from Traxstech via UPS
Shipped with Signature Required. If you choose to
waive Signature Required, we will not be responsible if UPS says your
package(s) was "Delivered" & you do not receive it.
Trolling Bar w/4.5" Straight
Risers & 6" Tracks
(Transom mounting - trolling bar across transom)
SALE TAKE 10% OFF
$591.99
DRB-8
|
Trolling Bar w/4.5" Reverse
Risers & Tracks
(Gunwale mounting - trolling bar across transom)
SALE TAKE 10% OFF
6" Tracks $611.99
12" Tracks
$641.99
18" Tracks
$681.99
24" Tracks
$727.99
36" Tracks
$763.99
48" Tracks
$869.99
60" Tracks
$953.99
DRBR-8-XX
Color Change to Black +10% from listed price
Select product for color change & quantity must match
quantity selected above
|
Substitute 6" Straight Riser
for 4.5" Straight Riser in Package
(Transom mounting - trolling bar across transom)
Order 2 per trolling bar
Add $11.00
DRBS-6
|
Substitute 6" Reverse Riser
for 4.5" Reverse Riser in Package
(Gunwale mounting - trolling bar across transom)
Order 2 per trolling bar
Add $11.00
DRBRS-6
|
Don't forget your
Backing plate
for thin-hulled boats
Build your own
shorter Trolling Bar setup
| Order the length of trolling bar you want
| Available in 2', 3', 4', 5', & 6' lengths. If you
want a length other than these, order the next longer
length & then order your
custom length below |
|
| Order 2 of the style & height risers you want
| Straight risers are mounted on the transom |
| Reverse risers are mounted on the gunwales (bar
across transom) |
|
| Order 2 of the length of track you want
| 6" is sufficient for straight riser setups |
| With reverse risers, any length track can be used &
additional components like rod holders, bird trees, etc.
can also be mounted in them. The tracks are
mounted at the very rear of the gunwales. |
|
| OR Order 2 Adjustable Gimbal Mounts for Trolling Bar
in place of tracks |
| Order Trolling Bar End Caps |
|
Trolling Bar
| Available in 2', 3', 4', 5', & 6' |
| 7' can be made by ordering 3' & 4' bars with a connecting plate |
| 8' can be made by ordering 2 4' bars with a connecting
plate |
| End caps sold separately below |
Also available in black for an additional 10%.
Order after ordering trolling bar
Drop shipped from Traxstech via UPS
SALE TAKE 10% OFF
2 Foot
$99.99
3 Foot $145.99
4 Foot $193.99
5 Foot $241.99
6 Foot $290.99
For 7' order a 3 Ft & 4 Ft plus Connecting Plate
For 8' order 2- 4 Ft plus Connecting Plate
Connecting Plate @ $26.99
DRB-X,
DRB-CP-1S
Trolling Bar Color Change to Black +10% from listed price
Select bar length for color change & quantity must match
quantity selected above.
Risers
| Available in 4 1/2" & 6" tall. |
| Straight riser for use when tracks are on transom - track mounted on top is same direction as base
track |
| Reverse riser for use when tracks are on gunwales - track mounted on top is perpendicular to base track |
Also available in black for an additional 10%.
Order after ordering risers
Straight - DRBS-4 or DRBRS6
Reverse - DRBRS-4 or DRBRS-6
Drop shipped from Traxstech via UPS
SALE TAKE 10% OFF
4.5" Straight
$78.99
6" Straight $88.99
4.5" Reverse $89.99
6" Reverse $99.99
Order 2 risers for each trolling bar
Risers Color Change to Black +10% from listed price
Select riser style for color change & quantity must match
quantity selected above
| |
|
Tracks
| Anodized aluminum
mounting track with a grooved bottom design |
| Available in 6", 12", 18", 24",
36", 48", 60", & 72" lengths |
| 3 1/2" wide. |
| Inside width 3" |
| Mounting holes 1 9/16" on center |
| Includes mounting screws |
| 60" & 72" tracks have a cutout (mounted towards the inside of the
boat) so pieces don't have to be slid the entire length of the track to
insert or remove |
If your boat has a thin hull, a backing plate is recommended
to distribute the weight to protect the boat from damage. Check
the underside of your gunwale (when reverse risers are used) or transom
(when straight risers are used) to see if it is thin or already
reinforced. If it is not reinforced, a backing plate should be
used under each track. Backing plates sold
here.
Also available in black for an additional 10%.
Order after ordering tracks
MT-XX
Drop shipped from Traxstech via UPS
SALE TAKE 10% OFF
6" $38.99
12" $53.99
18" $63.99
24" $73.99
36" $96.99
48" $114.99
60" $167.99
72" $209.99
Order 2 tracks for each trolling bar
Color Change to Black +10% from listed price
Select track length for color change & quantity must match
quantity selected above
|
Adjustable Gimbal Mount
Does not include top track
Trolling bar slides onto Gimbal Mount top plate. No riser necessary.
Designed to work in conjunction with an existing flush mount
gimbal.
Features
| 30 Degree Adjustable Gimbal Mount |
| 1-1/2 Inch Diameter Tube OR
1-3/4 Inch
Diameter Tube |
| If your flush mounts are not parallel with the gunwale, you can
use an adjustable gimbal to line up the trolling bar to where you want by moving
the bar in the direction you want. |
Also available in black for an additional 10%.
Order after ordering gimbal mounts
AGM-150-DB or AGM-175-DB
Drop shipped from Traxstech via UPS
Shipped with Signature Required If you choose to
waive Signature Required, we will not be responsible if UPS says your
package(s) was "Delivered" & you do not receive it.
SALE TAKE 10% OFF
1 1/2" Diameter Tube
$178.99
1 3/4" Diameter Tube $198.99
|
Color Change to Black +10% from listed price
Select gimbal mount tube size for color change & quantity must match
quantity selected above
|
Trolling Bar End Caps
| 2 per pack |
| Available in Black for 10% more |
DRBEC
Drop shipped from Traxstech via UPS or USPS Priority Mail.
(Choose UPS if also ordering other Traxstech products)
SALE TAKE 10% OFF
$49.99
per pack of 2
|
|
|
Custom Bar Size
If the lengths of trolling bars
in the "Build Your Own" section don't work for you, custom trolling
bar lengths can be ordered .
Order your trolling bar package (bar, risers, & tracks or gimbal mount) in the "Build
Your Own" section above.
Order the next size longer trolling bar than you want & then order your specific
custom length below.
The trolling bar will be cut down to your desired length.
Additional $20.00 per
trolling bar to cut
|
| | |
